"Uzbekistan airways" JSC

Tenders

24 May 2019

Tender for the purchase of hats and insignia.

Now the National airlines of the Republic of Uzbekistan «Uzbekistan airways» is announcing a tender for the purchase of hats and insignia. The list of items and the number of required products is shown in Table 1 to this request. Table №1 Quality and parametres requirements of the goods: № Product name Required quantity, pcs     1 Uniform cap for flight personnel 500   2 Uniform cap for male flight attendants 250   3 Patches of distinction (galloons, chevrons) for flight personnel 500   4 Shoulder insignia (epaulets) for flight personnel 1 000   The specified amount of the top uniform is intended for purchase until the end of 2019. Uniform cap for aircrew - made of half-woolen fabric with water-repellent impregnation on the lining. Consists of an oval-shaped bottom, four walls, a band, a headrest and a peak; rep tape is laid around the band; The forehead is made of pressed perforated leather; black visor, lacquered, edging performed on the edge. The shape of the cap is achieved by cutting and soft inserts inside. The height of the band is 5 cm, the height of the crown is 5,5 cm, the width of the visor is 5.5 cm. Accessories on the uniform cap for the commander of the aircraft - a double adjustable braided cord of golden color, attached to the rim with the help of two metal buttons of golden color; cockade approved sample; sewing in the form of oak leaves on the visor, made of metallic threads of golden color in manual technique. Accessories on the uniform cap for the co-pilot - a double adjustable braided cord of golden color, fastened to the rim with the help of two metal buttons of golden color; cockade approved sample. The composition of the lining fabric: 50% polyester, 50% viscose. It is possible to use fabrics (primary or lining) with a different composition of raw materials. The color of the lining, accessories and thread should match the color of the main fabric. The color of the uniform cap must be combined with the upper uniform for the flight personnel. Uniform cap for male flight attendants - made of wool blend fabric with water-repellent impregnation; on the lining. Consists of an oval-shaped bottom, four walls, a band, a headrest and a peak; rep tape is laid around the band; The forehead is made of pressed perforated leather; black visor, lacquered, edging performed on the edge. The shape of the cap is achieved by cutting and soft inserts inside. The height of the band is 5 cm, the height of the crown is 5.5 cm, the width of the visor is 5.5 cm. Accessories on the uniform cap for male flight attendants - double adjustable braided cord of silver color, attached to the rim with the help of two metal buttons of silver color; cockade approved sample. The composition of the lining fabric: 50% polyester, 50% viscose. It is possible to use fabrics (primary or lining) with a different composition of raw materials. The color of the lining, accessories and thread should match the color of the main fabric. The color of the uniform cap should be combined with the outer uniform for male flight attendants. The sleeve insignia (galloons, chevrons) for the flight personnel are ribbon-tape for insignia (golden color) of the established sample; is placed on the sleeves of the uniform jacket (below). The length is 235 mm, the width of one gal is 12 mm, the width of the insert (plastic insert) is 7 mm. Number of galloons: for the commander of the aircraft - 4 stripes; for the co-pilot - 3 stripes. The distance between the galloons in the patch is 3 mm. Shoulder insignia (shoulder straps) for flight personnel are removable shoulder straps of a fixed pattern with a rigid gasket. Length - 8 cm, width - 5 cm. The main fabric must match the color and quality of the main fabric of the uniform suit; The galloons are a standard pattern of golden color. The number of galloons on uniform should correspond to the sleeve insignia for flight personnel. The distance between galunami on epaulets - 3 mm. Special requirements to products: 1. Uniform caps must comply with all consumer properties imposed on headgear - protect from weather conditions, have resistance to external influences (including repeated dry cleaning (if provided)), assume minimal care efforts, maintain their shape for a long time and quality. 2. The color of the material should be resistant to fading, rubbing during use and cleaning. 3. All materials used for the production of uniform caps and insignia must be safe for workers: they must not smell, they must not be easily flammable. 4. The packaging must comply with the conditions of the export packaging, correspond to the nature of the property and ensure safety. 5. The following must be attached to the commercial offer: - documents on state registration of the enterprise; - license, permit and certificates for the types of services provided, type of activity and the products supplied; - certificates of origin of goods and compliance. 6. All documents and information submitted by Participants, including Proposals, must be written in Russian. If any information or documents are submitted in another language, they must be accompanied by a translation into Russian. 7. Delivery of Products is carried out according to the agreed schedule in accordance with the terms of the contract. 8. Delivery of Products is carried out on the terms of FCA - Airport of Departure (warehouse of the buyer's cargo agent) or DAP - Tashkent to the warehouse of the buyer. 9. Participants must necessarily provide a detailed commercial offer on company letterhead with a technical description of the goods offered, indicate delivery dates, or partial deliveries of goods with the possibility of manufacturing the specified product, cost of production on the terms of payment - 15% advance payment, 85% the fact of delivery of goods. 10. Participants must necessarily provide a sample of the proposed product in the amount of 1 unit for trial operation. Restrictions for participation in the competition: 1. Proposals must be submitted by legal entities (Participants) established in accordance with the legislation of the Republic of Uzbekistan. or with the laws of other countries; 2. The participant must not be insolvent, be in the process of liquidation or reorganization, be declared insolvent (bankrupt). Also, in respect of the Participant, no claims for recognition as insolvent (bankrupt) should be filed. A participant cannot be a firm whose property has been seized for any reason and (or) whose economic activity has been suspended. Proposals are accepted at: Uzbekistan, 100167, Tashkent Airport, KMTS Uzaviatehsnab NAC tel / fax / + 998 71 / 255-50-18, 255-35-24 e-mail: tnp.kmts@uzairways.com, uzblog_info@uzairways.com. Сontact person Rimma Tel.+99890 987 07 30, e-mail: rimma_kuzmina@mail.ru The deadline for receiving bids: until 18-00 hours 10.06.2019g.
24 May 2019

Special uniforms for women

Now the National airlines of the Republic of Uzbekistan «Uzbekistan airways» is announcing a tender for the purchase of special uniforms for women and accessories for a set of uniforms for women flight attendants. The list of items and the number of required products is shown in Table 1 to this request. Table №1 The set of uniforms for male flight attendants include: No. Product name Required quantity, pcs / pairs     1 Long Sleeve Jacket 1 100   2 Skirt 1100   3 Trousers 1100   4 Blouse (short sleeve; three quarter sleeve, 2,200 pieces of each type) 4400   5 The dress 1 100   6 Neckerchief (two types) (1100 pieces of each type) 2200   7 Apron 1100   8 Headdress 1100   9 Tissue gloves 1100   10 Leather gloves 1100   11 Metal Buckle Strap 1100   12 Badge (personal badge) 1100   13 Scrunchy 1100   The specified number of uniforms is intended for purchase until the end of 2019. Requirements for the composition and quality of products: A set of special uniforms for women flight attendants: 1. Jacket with long sleeves - color - aquamarine; length - average; silhouette - semi-adjacent, with relief seams; fastener - on two buttons; welt pockets; sleeve - long, two-sutural. The main fabric can be plain or jacquard (with a pattern in the national style) and should include the possibility of wearing the product in the summer season. It is possible for the fabric to have a contrasting color of individual elements of the jacket. The composition of the main fabric: 44% wool, 54% polyester, 2% lycra or 40% wool, 39% polyamide, 18% polyester, 3% elastane. The lining of the jacket is made of light lining fabric with the Airline logo in a checkerboard pattern; logo application method - jacquard; antistatic fabric treatment. The composition of the lining fabric: polyester or viscose. The color of the lining, accessories and thread should match the color of the main fabric. 2. Skirt - color - aquamarine; length - classic, covering the knees; silhouette - straight; fastener - zipper lock; belt - with loops for the strap. To ensure freedom of movement, the skirt may have relief seams with two year wedges on the back panel or a counter crease on the front panel. The main fabric can be plain or jacquard (with a pattern in the national style) and should include the possibility of wearing the product in the summer season. Perhaps the execution of a skirt made of fabric in a contrasting color. The composition of the main fabric: 44% wool, 54% polyester, 2% lycra or 40% wool, 39% polyamide, 18% polyester, 3% elastane. The lining of the skirt is made of lightweight lining with antistatic treatment. The composition of the lining fabric: polyester or viscose. The color of the lining, accessories and thread should match the color of the main fabric. 3. Pants - aquamarine color; silhouette - classic straight; The front halves of the trousers on the lining without folds; without pockets; landing - average, 2 cm below the waist; belt - with five loops for the strap; The arrows on the trousers are pssed in front and behind. The main fabric can be plain or jacquard (with a pattern in the national style) and should include the possibility of wearing the product in the summer season. Perhaps the execution of trousers made of fabric in a contrasting color; the addition of elastic bands on the belt for a more comfortable fit of the pants; stitch in the form of a pinch of the arrow, ironed along the front. The composition of the main fabric: 44% wool, 54% polyester, 2% lycra / elastane or 40% wool, 39% polyamide, 18% polyester, 3% elastane. The lining of the trousers is made of light lining fabric with antistatic treatment. The composition of the lining fabric: polyester or viscose. The color of the lining, accessories and thread should match the color of the main fabric 4. Blouse - silhouette - semi-adjacent with notches; without collar; clasp - on the front of the buttons; sleeve - short (to the elbow). Perhaps the execution of a blouse with a neck V-shaped or round shape, with a decorative trim neckline and bottom of the sleeves; with sleeves ¾; with a zipper on the back (one button). The main fabric should be light, non-transparent and should include the possibility of wearing the product in the summer season. It is possible to make a blouse made of a single-color fabric (white, color) or from a fabric with a printed pattern in the national style. The composition of the main fabric: 75% cotton, 21% polyamide, 24% elastane or 60% cotton, 37% polyester, 3% elastane, or 100% polyester. The color of the fittings and thread should match the color of the main fabric. 5. Dress - color - aquamarine; length - classic, covering the knees; silhouette - semi-adjacent, with relief seams; fastener - zipper lock; sleeve - short (to the elbow) with a figured V-shaped cut along the bottom of the sleeve. To ensure freedom of movement, the dress can have relief seams with two year wedges on the back panel or an opposite fold on the front panel. The main fabric can be plain or jacquard (with a pattern in the national style) and should include the possibility of wearing the product in the summer season. Perhaps the execution of a dress with a neck V-shaped or round shape, with a decorative trim neckline and bottom of the sleeves. The composition of the main fabric: 44% wool, 54% polyester, 2% lycra or 40% wool, 39% polyamide, 18% polyester, 3% elastane. The lining of the dress is made of lightweight lining with antistatic treatment. The composition of the lining fabric: polyester or viscose. The color of the lining, accessories and thread should match the color of the main fabric. 6. Neckerchief - not less than 50 x 50 cm in size, with a pattern in the national style and the logo of the Airline. Execution - two types of scarves in different colors. The composition of the main fabric: 100% polyester / viscose / natural fibers. 7. Apron - color - aquamarine, made in the form of an elongated vest with a belt and pockets. The main fabric must have dirt and water-repellent properties. Execution of an apron in other color is possible. The composition of the main fabric: 65% polyester, 35% cotton. 8. A headdress is a small borderless hat with a rigid frame and a thin elastic band for fastening the product on the head. Perhaps the execution of the cap from lacquered wool; the psence of water-repellent impgnation of the main fabric; the psence of additional small loops for fastening the cap to the hairstyle with the help of invisible hairpins. The color of the headgear should be combined with the overall image or be of a contrasting color. Composition of the main fabric: 100% natural wool / blended fabric. 9. Tissue gloves - a classic model with a length slightly above the wrist; made of elastic thin fabric; should fit your arm perfectly. The color of the glove fabric should be combined with a set of uniforms. 10. Leather gloves - a classic model just a little longer than the wrist; demi-season; should fit your arm perfectly. Perhaps the performance of gloves with a thin lining of knitwear, bikes, cotton or silk. The color of gloves should be combined with outerwear, shoes or headgear. 11. Strap with metal buckle - material - leather, strap width 2 cm. Perhaps a combined product design - the outer side - fabric with a pattern in the national style, the inner side - leather. The color of the strap should be combined with a set of uniforms. 12. The badge (personal badge) is not less than 6 x 2 cm in size, the material is metal or plastic, the type of attachment is a magnet or a safety pin. The product should contain the following information - the logo of the Airline and the name of the employee (flight attendant). 13. Scrunchy - material - fabric, used for attaching hair. The color of the product should be combined with a set of uniforms or with a hat. Special requirements: 1. Uniforms should be made in accordance with the request of the Airline. 2. The color of the material should be resistant to fading, rubbing when used, washed and cleaned. 3. Providing conditions for sanitary processing of products. 4. The packaging must comply with the conditions of the export packaging, correspond to the nature of the property and ensure safety. 5. The following must be attached to the commercial offer: - documents on state registration of the enterprise; - license, permit and certificates for the types of services provided, type of activity and the products supplied; - certificates of origin of goods and compliance. 6. All documents and information submitted by Participants, including Proposals, must be written in Russian. If any information or documents are submitted in another language, they must be accompanied by a translation into Russian. 7. Delivery of Products is carried out according to the agreed schedule in accordance with the terms of the contract. 8. Delivery of Products is carried out on the terms of FCA - Departure Airport (warehouse of the buyer's cargo agent) or DAP - Tashkent to the warehouse of the buyer. 9. Participants must necessarily provide a detailed commercial offer on company letterhead with a technical description of the goods offered, indicate delivery dates, or partial deliveries of goods with the possibility of manufacturing the specified product, cost of production on the terms of payment - 15% advance payment, 85% the fact of delivery of goods. 10. Participants must necessarily provide a sample of the proposed product in the amount of 1 unit for trial operation. Restrictions for participation in the competition: 1. Proposals must be submitted by legal entities (Participants) established in accordance with the legislation of the Republic of Uzbekistan. or with the laws of other countries; 2. The participant must not be insolvent, be in the process of liquidation or reorganization, be declared insolvent (bankrupt). Also, in respect of the Participant, no claims for recognition as insolvent (bankrupt) should be filed. A participant cannot be a firm whose property has been seized for any reason and (or) whose economic activity has been suspended. Proposals are accepted at: Uzbekistan, 100167, Tashkent Airport, KMTS Uzaviatehsnab NAC, tel / fax / + 998 71 / 255-50-18, 255-35-24, e-mail: tnp.kmts@uzairways.com, uzblog_info@uzairways.com. The deadline for receiving bids: until 18-00 hours 10.06.2019g.
24 May 2019

Special uniforms men's clothing for flight crews

Now the National airlines of the Republic of Uzbekistan «Uzbekistan airways» is announcing a tender for the purchase of special uniforms men's clothing for flight crews. The list of items and the number of required products is shown in Table 1 to this request. Table №1 The composition of a set of uniforms for flight personnel include: № Product name Required quantity, pcs.     1 Blazer 500   2 Trousers 1 000   3 White shirt with short sleeves 1000   4 White shirt with long sleeves 1 000   5 Tie 500   6 Trouser belt 500   7 Badge for flight personnel 500   The specified number of sets of uniforms is intended for purchase until the end of 2019. Set of uniforms for flight personnel:   1. Jacket - color - dark blue (nevy); cut - classic; silhouette - semi-adjacent; single-breasted, with a clasp on two buttons; Classic English collar; shelves with detachable barrels; slit pockets "in frame" with a flap; on the left shelf - a slotted pocket with a piece of paper; a back with an average seam, reliefs and two vents; the sleeve is long, two-sutural with a three-buttoned slot. The main fabric should be plain and smooth and should include the possibility of wearing the product in the summer season. The composition of the main fabric: 44% wool, 54% polyester, 2% elastane. The lining of the jacket is made of light lining fabric with an Airline logo in a staggered manner, the method of applying the logo is jacquard, antistatic fabric treatment. On the lining there are three inside pockets "in frame". The composition of the lining fabric: polyester or viscose. The color of the lining, accessories and thread should match the color of the main fabric. 2. Pants - color - dark blue (nevy); cut - classic; straight, with ironed arrows; with leu; The front halves of the trousers on the lining without folds; side pockets are located in cutting barrels; on the right and left rear halves - slit pockets "in frame" with a button closure; two-part belt with closed ends, with three loops at each half-belt; bottom pants without cuffs. The main fabric should be plain and smooth and should include the possibility of wearing the product in the summer season. The composition of the main fabric: 44% wool, 54% polyester, 2% elastane. The lining of the trousers is made of light lining fabric with antistatic treatment. The composition of the lining fabric: polyester or viscose. The color of the lining, accessories and thread should match the color of the main fabric. 3. White shirt with short sleeves - silhouette - straight; with shoulder strap for shoulder insignia (shoulder straps); fastener on a peredu on buttons (level); stand collar; short-sleeved sleeve with cuffs; on the back is a double-edged yoke that goes over to the ledge; On the shelves are patch pockets with flap buttons, a fold in the central part of the pocket, and a hole for the handle in the upper part of the valve of the left pocket. The main fabric should be plain and smooth. It is possible to make a shirt with an embroidered Airline logo in the upper part of the flap of the left pocket. The composition of the main fabric: 55% cotton, 45% polyester or 65% cotton, 35% viscose. The color of the fittings and thread should match the color of the main fabric. 4. White shirt with long sleeves - silhouette - straight; with shoulder strap for shoulder insignia (shoulder straps); fastener from the front on buttons (level); stand collar; long sleeve; bottom sleeves with a stitched cuff, fastened with 2 buttons; on the back is a double-edged yoke that goes over to the ledge; patch pockets with buttoned flaps are located on the shelves, a fold in the central part of the pocket, a hole for the handle in the upper part of the valve of the left pocket. The main fabric should be plain and smooth. It is possible to make a shirt with an embroidered Airline logo in the upper part of the flap of the left pocket. The composition of the main fabric: 55% cotton, 45% polyester or 65% cotton, 35% viscose. The color of the fittings and thread should match the color of the main fabric. 5. Tie - classic shape, elongated, tied with a knot; the upper part is extended downwards, the sides are sloping; upper part narrowed; the ends of the tie end in corners; on the inside of the upper part of the tie there is a loop for fixing the end of the lower part. The main fabric can be smooth or jacquard. The composition of the main fabric: 100% polyester. The color of the lining and thread should match the color of the main fabric. The color of the tie should be combined with a jacket and trousers. 6. Trouser belt - material - smooth leather, color - black, shape - classic with an open metal buckle of silver color, width - no more than 4 cm. 7. The badge for the flight crew is embossed, made in the form of stylized wings with the Humo bird in the center; material of manufacture - metal of two colors (gold and silver), attachment type - “butterfly” / magnet; size not less than 8.5 x 1.5 cm. Reliability requirements Uniforms should comply with all consumer properties imposed on clothes - protect against weather conditions, maintain body temperature, be resistant to external influences (including repeated dry cleaning (if provided)), ensure movement safety and comfort, assume minimal effort care, keep its shape and quality for a long time. All products that are included in the set of uniforms should be marked / care instructions. Comply with the quality of products requirements of the technical description. The production of uniforms from high-quality raw materials, providing the characteristics of novelty and freshness, appearance for the period of wearing, ensure maximum comfort. Special requirements: 1. Uniforms should be made in accordance with the request of the Airline. 2. The color of the material should be resistant to fading, rubbing when used, washed and cleaned. 3. Providing conditions for sanitary processing of products. 4. The packaging must comply with the conditions of the export packaging, correspond to the nature of the property and ensure safety. 5. The following must be attached to the commercial offer: - documents on state registration of the enterprise; - license, permit and certificates for the types of services provided, type of activity and the products supplied; - certificates of origin of goods and compliance. 6. All documents and information submitted by Participants, including Proposals, must be written in Russian. If any information or documents are submitted in another language, they must be accompanied by a translation into Russian. 7. Delivery of Products is carried out according to the agreed schedule in accordance with the terms of the contract. 8. Delivery of Products is carried out on the terms of FCA - Departure Airport (warehouse of the buyer's cargo agent) or DAP - Tashkent to the warehouse of the buyer. 9. Participants must necessarily provide a detailed commercial offer on company letterhead with a technical description of the goods offered, indicate delivery dates, or partial deliveries of goods with the possibility of manufacturing the specified product, cost of production on the terms of payment - 15% advance payment, 85% the fact of delivery of goods. 10. Participants must necessarily provide a sample of the proposed product in the amount of 1 unit for trial operation. Restrictions for participation in the competition: 1. Proposals must be submitted by legal entities (Participants) established in accordance with the legislation of the Republic of Uzbekistan. or with the laws of other countries; 2. The participant must not be insolvent, be in the process of liquidation or reorganization, be declared insolvent (bankrupt). Also, in respect of the Participant, no claims for recognition as insolvent (bankrupt) should be filed. A participant cannot be a firm whose property has been seized for any reason and (or) whose economic activity has been suspended. Proposals are accepted at: Uzbekistan, 100167, Tashkent Airport, KMTS Uzaviatehsnab NAC, tel / fax / + 998 71 / 255-50-18, 255-35-24, e-mail: tnp.kmts@uzairways.com, uzblog_info@uzairways.com. Сontact person Rimma Tel.+99890 987 07 30, e-mail: rimma_kuzmina@mail.ru The deadline for receiving bids: until 18-00 hours 10.06.2019.
14 May 2019

A tender for the purchase of rescue equipment for the Boeing 787

The national airline Uzbekistan Airways announces a tender for the purchase of rescue equipment for the Boeing 787 (03.04.05 + 06) aircraft of Uzbekistan Airways: Composition and quality requirements: № Nomination Product description QTY 1 Baby seat belts • Children's belt should fit children: Width: 22 to 44 pounds Height: up to 40 inches • The containment system must be of good quality. • Approved by the Federal Aviation Administration 40 ea 2 Wheelchairs for air passengers • Chair parameters in unfolded: Length: (+/-) 760 mm / 29.9 pounds Height: (+/-) 1035 mm / 40.75 pounds Width: (+/-) 385 mm /15.15 pounds (+/-) 345 mm /13.58 pounds (+/-) 375 mm /14.76 lbs Maximum weight: (+/-) 14,5kg /31.9 pounds • Parameters of the chair in a folded: Length: (+/-) 890 mm / 35.04 pounds Height: (+/-) 385 mm / 15.15 pounds Width: (+/-) 270 mm / 10.63 pounds • Vinyl coating • Pocket on the back of the seat for magazines and newspapers • Shoulder, leg and hip belt with velcro-type at the end • 360° swivel castors • Foot brake on both rear wheels • Durable stainless steel chassis On-board wheelchairs must include footrests, armrests which are movable or removable, adequate occupant restraint systems, a backrest height that permits assistance to passengers in transferring, structurally sound handles for maneuvering the occupied chair, and wheel locks or another adequate means to prevent chair movement during transfer or turbulence. 4 ea 3 Baby bassinet complete with carrying bag for transporting children in the plane • Parameters of the baby bassinet in unfolded: Length: (+/-) 752 mm / 29.6 inches Width: (+/-) 342 mm / 13.5 inches Height: (+/-) 226 mm / 8.9 inches Maximum weight: (+/-) 5 kg / 11 pounds Load limit: (+/-) 11.0 kg / 24.3 lb • Parameters of a baby bassinet in a folded: Packed in a carry bag Length: 767 mm, 30.2 inches Width: 397 mm, 15.6 inches Height: 127 mm 5 inches 16 ea Goods must be new, not previously used. You have to provide a choice of colors. Scope: Ensuring the comfort and safety movement of air passengers during Uzbekistan Airways flights. Payment terms: within 45 banking days upon delivery of goods to Tashkent (Republic of Uzbekistan) Goods delivery terms: DAP or CIP - Tashkent, Tashkent International Airport named Islam Karimov, Uzaviatexsnab MSD; FCA airport sender, according to INCOTERMS-2010. Packaging of shipment ready Goods must comply with Export packaging terms, technical requirements of manufacturing factory and comply with nature of Goods, also packaging must guarantee safety of Goods during transportation period, particularly by different type of transportation, providing due handling of the Goods. Terms of delivery of goods: within 30 calendar days from the date of signing the contract and registration in the prescribed manner. Firms and organizations that specialize in the production and supply of a specified type of product, or have an existing agreement with manufacturers for its sale and supply, can take part in the competition. Restriction for participation in Bids: 1. Offers must be submitted by Legal entities (Participants) established as per legislation of the Republic of Uzbekistan or in accordance with legislation of other countries. 2. Participant must NOT be bankrupt, in process of liquidation or reorganization, or insolvent. Also, in relation to the Participant no claims for insolvency (bankruptcy) must be declared. Company whose property is seized for any reason and (or) business activity that has been stopped cannot participate in Bids. Bid offers are accepted at: Address: Republic of Uzbekistan, GSP, 100167, Tashkent, Tashkent International Airport named after Islam Karimov, «Uzaviatexsnab» MSD To whom: Director of «Uzaviatexsnab» MSD Mr. Alimkhodjayev R. D. Phone/Fax: (+998 71) 254-85-92, 255-35-24, 254-26-87 E-mail: Raisa.Batkaeva@uzairways.com, uzblog@uzairways.com For additional information for participants, please contact: +998 93516-14-20, +99871254-85-92, e-mail: Raisa.Batkaeva@uzairways.com, uzblog@uzairways.com Bid offer submission deadline: until 31.05.2019 10-00 HOURS Tashkent time.
01 May 2019

The contest on aquisition of the diesel engine "Mercedes" OHM 441 LA III/1

The State Unitary enterprise "Islom Kаrimov nomidagi TOSHKENT XALQARO AEROPORTI" again declares the contest on aquisition of the diesel engine "Mercedes" OHM 441 LA III/1 1. The Name, technical parameters, amount and starting cost to product: The Diesel engine "Mercedes" OHM 441 LA III/1, without, starter, generator , water pump, маховика, in collection with head of the block and with fuel equipment - without fall, only new, amount - one unit. The Duration of the price not less 60 days 2. The Obligatory requirements of the Customer to Supplier. Delivered engine (hereinafter Goods) must be new, not former in usages. Goods must be a factory fabrication and have a certificate of the origin and correspondences to, technical passport of the manufacturer, as well as the documents certifying legality of the import. The Warranty period on delivered product is fixed not less 6 months from delivery date of Goods on storehouse of the Customer. Change the conditions of the payment, delivery date is not allowed. 3. The Terms of the payment: not more than 30 % down payments for 10 bank days on the date hereof contract, rest - contractually with winner of the contest. 4. The Terms of delivery goods: Way of delivery of Goods: for foreign supplier - a plane, for domestic - a motor transport. The Cost of transportation must be comprised of cost of goods. 5. Currency of the contest: US DOLLAR or Euro. 6. Following data without fall must be specified In competitive offer: Name of goods – Mark - Ukomplektovannosti engine Engine size – Warranty period, knead not less Terms of the payment Currency contract of the Term of delivery СРT Transport of transportation    - Country of the origin of goods Country producer goods The Company producer goods. Point of the shipment of goods to Indicate city and country Cost of the unit of goods……….. 7. The Delivery date of goods: not more than 50 calendar days from receipt of downpayments.    8. The Contact requisitions: 100167 Tashkent, Aeroporti GA, str. Kumarik, 13 GUP "Toshkent Xalqaro aerоporti" Telephone for references: +(99871)140-29-54, +(99890)1876219, fax: 140-28-48 E-mail: sst.tas@uzairways.com 9. The Period of the receiving the commercial offers on participation in contest before 22.054.2019 before 14 hours time Tashkent. The Commercial offers are taken on mail, fax, e-mail. Information is taken in Russian language only
19 Apr 2019

Large plastic reusable plate

Now the National airline of the Republic of Uzbekistan «Uzbekistan Airways» has need to purchase the following products: № Production name In quantity 1 Large plastic reusable plate. Description of the plate: Material: plastic intended for food products (SAN plastic, etc.). Manufacturing method: Moulding or plastic formation in the form. Color: White - from the inside; Green - from the outside. Dimensions (length/width/height): 180x116x24 mm. Weight: ~ 55 gr. On all four lateral edges, there are smooth, decorative deepenings. On the basis of the plate between the stability edges there is a gap ~ 1 cm. At the bottom of the plate from the outside should be put the logo of Uzbekistan Airways in the color of the product. 5,000 pieces For participation in competition it is necessary to give product samples and the detailed offer on the letter-head with the technical specification on offered production, cost per unit of output, terms of delivery, possible delivery time, on a condition of 15% of an advance payment, the others of 85% upon receipt of goods the goods. In the commercial proposal it is necessary to indicate whether your organization is a VAT payer. If your enterprise has the possibility and is interested in supplying the above-stated products for the needs of our airline, I ask you to inform the following contact details: Uzbekistan, 100167, Tashkent Airport, KMTS Uzaviatekhsnab NAK, tel / fax: + 998 (71) 255-50-18, 255-05-51, 255-35-24, e-mail: tnp.kmts@uzairways.com, uzblog_info@uzairways.com. We hope for mutually beneficial cooperation and your prompt response. The deadline for accepting proposal is 30.04.2019.
09 Apr 2019

Drawers for glasswar​e

Currently, Uzbekistan Airways has a need to acquire drawers for glassware for passenger service on flights NAC "Uzbekistan Airways». 1. Drawer for glass of wine (the diameter of the glass – 5cm, height – 10,9cm) in the amount of 300 pieces. 2. Drawer for glass and for shot (the diameter of the glass – 7cm, height 9,5cm, shot – 6cm, height – 7cm) в количестве 700 штук. The height of Drawer for glass  must meet the parameters of glassware. Drawer for glass must be of dimensions (length, width) allowing it to be placed in the on-Board service cart of the standard «Atlas» We also ask you to consider the possibility of manufacturing drawer for glass different color: 300 pieces of one color, 700 pieces of other color. In order to determine the possibility of purchasing this product, we ask you to inform the possibility of delivery, possible delivery time, the cost of products on the terms of payment 15% advance payment, 85% upon delivery to Tashkent. If available, we ask you to provide licenses and certificates available from Your company. If Your company has the opportunity and interest in the supply of the above products for the needs of our airline, please contact us using the following contact details: Uzbekistan, Tashkent 100167, Airport «Tashkent», MSD “UZAVIATEXSNAB” NAC, tel/fax /+99871/255-68-37, е-mail: kmts.sg@uzairways.com, uzblog_peo@uzairways.com. We also ask you to provide samples and technical description of the offered products. Your offer please send to our address to 12.04.2019. Commercial offers are accepted by mail, Fax, e-mail. The information must be in Russian or translated into Russian.
05 Apr 2019

Road sets

Now the National airline of the Republic of Uzbekistan "Uzbekistan Airways” announces a competition on acquisition of the following products: - road sets for business class air passengers on the flights performed to/from the CIS through the Republic of Uzbekistan' airports, flight duration of 2 hours (the reduced set is of 4 pieces), with development of design, production and delivery - 29,000 pieces of sets. Requirements to structure and quality of products: Bag packing  -a bag packing has to ensure safety of the enclosed set elements.  -form: bag fabric facilitated.  -material: non woven cloth "Spunbond" density lOOgr/sq.m, nice on the touch, cord fabric.  -size: length is no more than 35 cm, width no more than 31 cm. - has to be qualitative, suitable for further use and it is executed in stylish design.  Registration: with use of corporate colors of Airline, with the ’ original drawing, a composite logo of “Uzbekistan airways”. Eyes mask  -a mask quilted (the size of one element stitches - 3.5kh3.5sm)  -the outer side of a mask from the natural, mixed fabrics which are doing not pass light (gabardine, density 160gr/sq.m)  -light filter  -The inside has to be made of cotton fabric.  -elastic band of black color 5 mm wide.  -a mask in individual packing.  Registration: with use of corporate colors of Airline, with an original pattern stitches. 3. Slippers  -slippers quilted (the size of one element stitches - 3.5*3.5 cm);  -with the closed cape  -material - cotton fabric (gabardine, density - 160 g/sq.m); the size - 44;  -the sole - rubberized, nonskid, moisture resistant, thickness of 5 mm, color of a sole matches the color of material of slippers, a shomost - 50 BLINDERS; individual packing; Schild with a logo of Airline, (shilda-a marking product on goods a label, the plate containing an advertisement (a signature logo of UZBEKISTAN AIRWAYS). 4. A horn for footwear  -a horn for footwear with a ring  -sizes: length - from 12 cm to 14.5 cm, width - 4 cm;  -material - strong plastic;  Registration in color design and logo of Airline. Note: Special requirements to products: 1. The road set (reduced) for business class passengers is: an original bag road in individual packing with the components enclosed in it. 2. Components of road sets for business class passengers and a bag packing road have to be suitable on functions, design and color both for men and for women. 3. All materials used in production of road sets for passengers of a business class have to be non-toxic, harmless, safe for passengers; should not have a smell, should not be easily combustible, should not be pricking and cutting. Coloring of materials, the put elements have to be permanent to fading, deleting when using, washing and cleaning. 4. A cosmetics bag road and components of sets have to be issued according to Signature flowers of Airline. 5. Marking of the making road sets has to conform to requirements of legislation of the Republic of Uzbekistan., contain all necessary information, has to be executed in the Uzbek, Russian and English languages. The expiration date of the making road sets has to expire not earlier than in 12 months from the date of set delivery. 6. Packing, marking have to correspond to the nature of Goods and ensure its full safety when transporting. The following information should be reflected without fail: The following information should be reflected without fail: 1. The completed and detailed technical specification on the offered goods. 2. Unit of production cost on FCA delivery conditions - the departure Airport (Beijing / Paris / Frankfurt am Main / Rome / Istanbul/ Any airports of the CIS countries), the cargo agent of the buyer taking into account all export formalities or CIP/CPT/DAP - Tashkent (buyer's warehouse). 3. Acceptable payment conditions. 4. Production and finished goods delivery time. 5. Possibility of registration of the “Origin certificate” on the delivered goods. 6. Possibility of registration of the “Conformity certificate” on the delivered goods. The Commercial Offer is represented on the Supplier's head letter blank. The following documents must be attached to the Commercial Offer; 1. Product samples or materials (or colour electronic breadboard) models and photos of the offered goods. 2. Copies of the State registration documents of your enterprise in host country. 3. ISO production Certificates. 4. The List of the Companies to whom your enterprise delivered given goods for the last 12 months. All submitted documents and information including the Proposals must be in Russian or English. Restrictions for participation in the Contest: 1. Proposals must be submitted by legal entities (Participants) established in accordance with the legislation of the Republic of Uzbekistan or the legislation of the countries of the Supplier. 2. The participant must not be insolvent, be in the process of liquidation or reorganization, be declared insolvent (bankrupt). Also, with respect to the Participant should not be filed claims for insolvency (bankrupt). A participant may not be an Organization whose property is seized on any grounds and(or) whose economic activity is suspended. Proposals are accepted at; MSD “UZAVIATEXSNAB”, National Airline, GSP100167, Republic of Uzbekistan, Tashkent, Airport «Tashkent», tel / Fax /+998 71/ 255-68-37, 255-35-24,254-26-87, 255-50-18 e-mail: uzblog kmts.sg@uzairways.com, uzblog_peo@uzairways.com. Term of reception of competitive offers: till 26.04.2019. Competitive offers are accepted by mail, to the fax, e-mail, purposely.
26 Mar 2019

Announcement

The State Unitary enterprise "ISLOM KARIMOV NOMIDAGI TOSHKENT XALQARO AEROPORTI" declares about undertaking the contest on aquisition car passenger ship's ladder (hereinafter Ship's ladder) for boarding passenger in(from) air court in amount 4-h units on negotiated price. The Contract conditions: The Conditions of the payment: 30% down payment, rest 70% - immediately after transfer Ship's ladder buyer. Currency of the payment - a Bags Uzbekistan shade USA DOLLAR. The Terms of delivery goods: on condition СРT on customs post 00102 "AVIA YUKLAR VED", STK "Tashkent-AERО". The Grantee - GUP "ISLOM KARIMOV NOMIDAGI TOSHKENT Halqaro Aeroporti" one of the overland type of the transport. The Delivery date of goods: not more than 90 calendar days from receipt of down payments. For reception of the Specificationses and contest participant instructions, necessary to send the written demand on fax or e-mail. The Demand must have a registration number and in her must be specified bank requisitions of the pretender as well as conjectural cost of the Ship's ladder. To commercial offer must be an attached documents, enumerated in contest participant instructions In contest can take part foreign and domestic manufacturers, company and organizations eligible to wholesale business. The Competitive offers are taken to: Where: Uzbekistan, 100167, Tashkent, GUP "Islom Karimov nomidagi Toshkent Xalqaro Aeroporti" To whom: Deputy director of the aeroportAlimovu A.M. (for SST). The Telephone for references: + (99871) 140-29-54, fax: 140-28-48 E-mail: sst.tas@uzairwavs.com Period of the receiving the commercial offers on participation in contest before 15.04.2019. The Commercial offers are taken on mail, fax, e-mail or courier. Authentic documents must be given not later 25.04.2019
26 Mar 2019

Competition for the purchase of inserts separators for glassware

Currently, Uzbekistan Airways has a need to acquire drawers for glassware for passenger service on flights NAC "Uzbekistan Airways». 1. Drawer for glass of wine (the diameter of the glass – 5cm, height – 10,9cm) in the amount of 300 pieces. 2. Drawerforglassand for shot (the diameter of the glass – 7cm, height 9,5cm, shot – 6cm, height – 7cm) in the amount of 700 pieces. The height of Drawer for glass  must meet the parameters of glassware. Drawerforglass must be of dimensions (length, width) allowing it to be placed in the on-Board service cart of the standard «Atlas». We also ask you to consider the possibility of manufacturing drawer for glass different color: 300 pieces of one color, 700 pieces of other color. In order to determine the possibility of purchasing this product, we ask you to inform the possibility of delivery, possible delivery time, the cost of products on the terms of payment 15% advance payment, 85% upon delivery to Tashkent. If available, we ask you to provide licenses and certificates available from Your company. If Your company has the opportunity and interest in the supply of the above products for the needs of our airline, please contact us using the following contact details: Uzbekistan, Tashkent 100167, Airport «Tashkent», MSD “UZAVIATEXSNAB” NAK, tel/fax /+99871/255-68-37, е-mail: kmts.sg@uzairways.com, uzblog_peo@uzairways.com. We also ask you to provide samples and technical description of the offered products. Your offer please send to our address to 29.03.2019. Commercial offers are accepted by mail, Fax, e-mail. The information must be in Russian or translated into Russian.

Pages