Uzbekistan airways

Tender for the purchase of hats and insignia.

24 May 2019

Now the National airlines of the Republic of Uzbekistan «Uzbekistan airways» is announcing a tender for the purchase of hats and insignia.

The list of items and the number of required products is shown in Table 1 to this request.

Table №1

Quality and parametres requirements of the goods:

Product name

Required quantity, pcs

 
 

1

Uniform cap for flight personnel

500

 

2

Uniform cap for male flight attendants

250

 

3

Patches of distinction (galloons, chevrons) for flight personnel

500

 

4

Shoulder insignia (epaulets) for flight personnel

1 000

 

The specified amount of the top uniform is intended for purchase until the end of 2019.

Uniform cap for aircrew - made of half-woolen fabric with water-repellent impregnation on the lining.

Consists of an oval-shaped bottom, four walls, a band, a headrest and a peak; rep tape is laid around the band; The forehead is made of pressed perforated leather; black visor, lacquered, edging performed on the edge. The shape of the cap is achieved by cutting and soft inserts inside. The height of the band is 5 cm, the height of the crown is 5,5 cm, the width of the visor is 5.5 cm.

Accessories on the uniform cap for the commander of the aircraft - a double adjustable braided cord of golden color, attached to the rim with the help of two metal buttons of golden color; cockade approved sample; sewing in the form of oak leaves on the visor, made of metallic threads of golden color in manual technique.

Accessories on the uniform cap for the co-pilot - a double adjustable braided cord of golden color, fastened to the rim with the help of two metal buttons of golden color; cockade approved sample.

The composition of the lining fabric: 50% polyester, 50% viscose.

It is possible to use fabrics (primary or lining) with a different composition of raw materials.

The color of the lining, accessories and thread should match the color of the main fabric.

The color of the uniform cap must be combined with the upper uniform for the flight personnel.

Uniform cap for male flight attendants - made of wool blend fabric with water-repellent impregnation; on the lining.

Consists of an oval-shaped bottom, four walls, a band, a headrest and a peak; rep tape is laid around the band; The forehead is made of pressed perforated leather; black visor, lacquered, edging performed on the edge. The shape of the cap is achieved by cutting and soft inserts inside. The height of the band is 5 cm, the height of the crown is 5.5 cm, the width of the visor is 5.5 cm.

Accessories on the uniform cap for male flight attendants - double adjustable braided cord of silver color, attached to the rim with the help of two metal buttons of silver color; cockade approved sample.

The composition of the lining fabric: 50% polyester, 50% viscose.

It is possible to use fabrics (primary or lining) with a different composition of raw materials.

The color of the lining, accessories and thread should match the color of the main fabric. The color of the uniform cap should be combined with the outer uniform for male flight attendants.

The sleeve insignia (galloons, chevrons) for the flight personnel are ribbon-tape for insignia (golden color) of the established sample; is placed on the sleeves of the uniform jacket (below). The length is 235 mm, the width of one gal is 12 mm, the width of the insert (plastic insert) is 7 mm.

Number of galloons: for the commander of the aircraft - 4 stripes; for the co-pilot - 3 stripes.

The distance between the galloons in the patch is 3 mm.

Shoulder insignia (shoulder straps) for flight personnel are removable shoulder straps of a fixed pattern with a rigid gasket. Length - 8 cm, width - 5 cm.

The main fabric must match the color and quality of the main fabric of the uniform suit; The galloons are a standard pattern of golden color.

The number of galloons on uniform should correspond to the sleeve insignia for flight personnel. The distance between galunami on epaulets - 3 mm.

Special requirements to products:

1. Uniform caps must comply with all consumer properties imposed on headgear - protect from weather conditions, have resistance to external influences (including repeated dry cleaning (if provided)), assume minimal care efforts, maintain their shape for a long time and quality.

2. The color of the material should be resistant to fading, rubbing during use and cleaning.

3. All materials used for the production of uniform caps and insignia must be safe for workers: they must not smell, they must not be easily flammable. 4. The packaging must comply with the conditions of the export packaging, correspond to the nature of the property and ensure safety.

5. The following must be attached to the commercial offer: - documents on state registration of the enterprise; - license, permit and certificates for the types of services provided, type of activity and the products supplied; - certificates of origin of goods and compliance.

6. All documents and information submitted by Participants, including Proposals, must be written in Russian. If any information or documents are submitted in another language, they must be accompanied by a translation into Russian.

7. Delivery of Products is carried out according to the agreed schedule in accordance with the terms of the contract.

8. Delivery of Products is carried out on the terms of FCA - Airport of Departure (warehouse of the buyer's cargo agent) or DAP - Tashkent to the warehouse of the buyer.

9. Participants must necessarily provide a detailed commercial offer on company letterhead with a technical description of the goods offered, indicate delivery dates, or partial deliveries of goods with the possibility of manufacturing the specified product, cost of production on the terms of payment - 15% advance payment, 85% the fact of delivery of goods.

10. Participants must necessarily provide a sample of the proposed product in the amount of 1 unit for trial operation.

Restrictions for participation in the competition:

1. Proposals must be submitted by legal entities (Participants) established in accordance with the legislation of the Republic of Uzbekistan. or with the laws of other countries;

2. The participant must not be insolvent, be in the process of liquidation or reorganization, be declared insolvent (bankrupt).

Also, in respect of the Participant, no claims for recognition as insolvent (bankrupt) should be filed. A participant cannot be a firm whose property has been seized for any reason and (or) whose economic activity has been suspended.

Proposals are accepted at:
Uzbekistan, 100167, Tashkent Airport, KMTS Uzaviatehsnab NAC
tel / fax / + 998 71 / 255-50-18, 255-35-24
e-mail: tnp.kmts@uzairways.com, uzblog_info@uzairways.com.
Сontact person Rimma Tel.+99890 987 07 30, e-mail: rimma_kuzmina@mail.ru

The deadline for receiving bids: until 18-00 hours 10.06.2019g.